Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

ARCTIC COOLING Lüfter ARCTIC 140*140*25 F14 PWM

Forsiden Hardware PC Komponenter Køling ARCTIC COOLING Lüfter ARCTIC 140*140*25 F14 PWM
For at se vores priser, skal du være oprettet som kunde. Klik her for at blive oprettet.
Er du allerede oprettet som kunde, skal du blot logge ind. Log ind her.
ARCTIC COOLING Lüfter ARCTIC 140*140*25 F14 PWM (ACFAN00079A)

ARCTIC COOLING Lüfter ARCTIC 140*140*25 F14 PWM

Varenr.:
ACFAN00079A
EAN:
0872767008533
  • Brugt areal PC køleventilator
  • Fan diameter 14cm
Forventes på lager 08-04-2024
Beskrivelse

F14 PWM PST


4-Pin PWM fan with standard case

Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Perfect Case Fan Regulation with PWM
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Controller Made in Germany
The ARCTIC F14 PWM PST fan is well known for high airflow at a comfortable noise level. The real improvement is the motor and controller. Our German engineers made this fan work at lower speed when performance is not needed. Often motherboards don't provide PWM signals below 40 % and thus make PCs unnecessary loud - not so with the F14 PWM PST.

PWM Sharing Technology (PST) Lowers Noise
If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.

Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.


Specifications:

Air Flow:
  • 74 CFM / 126 m3/h (@ 1,350 RPM)
Noise:
  • 0.3 Sone (@ 1,350 RPM)
Typical Voltage:
  • 12V DC
Current
  • 0.11A
Start-up Voltage:
  • 6.0V DC (@ 100% PWM)
Cable Length:
  • 400 mm
Sub PST Cable Length:
  • 50 mm
Connection
  • Motherboard: +12V DC
  • PWM control signal
  • 4-pin socket

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.